1592016130 XV300K EN MASTER r1.1 16.06.2015
[IF REAL TIME CLOCK AVAILABLE]
With clock option ON the display visualizes the date and time of the last stop next to the number of stops.
16 REAL TIME CLOCK
The following functions are available only in the controllers provided with the related
option and only with a backup battery type CR2032-3V (not provided) as represented in
the image. The battery duration highly depends on the temperature of the environment
and lasts 3 years in average. With low battery the display visualizes β
Displays the date and time of the internal clock.
To change press .
In this menu a weekly calendar can be enabled to edit the setting mode by
activating the speed limits SPD1, SPD2 ant control the relays
Press the key to enter the editing mode.
Then press and to enable (ON) or disable (OFF) the clock option of
each day of the week and increase or decrease the hours and the minutes
when the enabling starts and finishes.
Once changed the time, the system asks to copy the setting on the next day
of the week. To save press the key , to cancel press .
Caution: As represented in the image, if the operation start is set on the day
before the day of the operation end, this will be set on the next day. Only
one time can be set per day
To Next Page
Loading...
Need help?
General
