E Series Drives Basic Installation Manual
Underwriters Laboratories Recognition
The E-Series drives are marked with the "UL Recognized" label after passing
a rigorous set of design and testing criteria developed by UL (UL508C). This
label indicates that the UL certifies this product to be safe when installed
according to the installation guidelines and used within the product
specifications.
The "conditions of acceptability" required by UL are:
• The drive ambient temperature must be 40 degrees C or less.
This product is suitable for use on a circuit capable of delivering not
more than 5000 RMS symmetrical amperes, 240 Volts maximum.
The "UL Recognized" designation is different than a "UL Listed" designation.
The "UL Listed designation is generally applicable to stand alone products
where the "UL Recognized" designation is used for components that are part of
a system. E Series Drives are usually considered components of a larger control
system where the "UL Recognized" designating is very common and well
accepted.
iv
To Next Page
Loading...
Need help?
General