Emerson IC200CX EVO - ON;OFF by Keyboard; ON;OFF by Remote Supervision

IC200CXEVO
usermanual
10
3.2ON/OFFbykeyboard
Pressandreleasetheheatpumpmo
dekeytoturn
theunitoninheatingmode.
Pressandreleasethechillermo
dekeytoturnthe
unitonincoolingmode.
Note:withtheunitinstandbymode,i.e.activatedbydigitalcontact,butwithoutibeingswitched
oninchillerorheatpumpmode,itispossibletoviewthemeasuredvariablesthroughthedisplay
andmanagethealarmsituationsbydisplayingandsignalingthem(seebelow).
3.3ON/OFFbyremotesupervision
SwitchingON/OFF,aswellascompletemanagementoftheunit(changeofmode,readingof
temperatures,states,alarms,etc.)ispossibleviaModbusprotocolonRS485serialorviaXWebremote
supervisionsystem.
Pleaserefertothededicatedmanualsfordetails.
Whentheunitison,themodeLEDindicatesthe
functioninginchillerorheatpump,thepumpicon
turnsonandthentheoperatingiconsofthe
condenserfansandthecompressorsaredisplayed.