Emerson IC200CX EVO - Probes Visualisation; Set Point Visualisation and Modification; Alarm Visualisation

IC200CXEVO
usermanual
52
12.2Probevisualisation
Presskeytovisualizethevalueoftheprobes
configuredontheunit(pressorto
visualizealltheprobes).
12.3Setpointvisualisationandmodification
Presskeytoreadthevalueofthesetpoint(coolingsetpointiftheIchillisincoolingmode,
heatingsetpointiftheIchillisinheatingmode,coolingandhatingsetpointiftheIchillisinSTD_
BY
orremoteOFF,Domestichotwaterwhenenabled).
ItisalsopossibletoreadthestatusoftheEnergysaving,thestatusoftheDynamicsetpointandthe
realvalueofthesetpointiftheEnergysavingorDinamicsetpointareactive.
Tomodifythesetpoint(Cooling,HeatingorDomestichotwater):
•usethekeystoselectthevalueof
thesetpoint
•press
•usethekeystomodifythevalue
•presstoconfirmtheoperation
12.4Alarmvisualisation
Presskeytoreadthealarmstatus;thealarmstatuscanbe:
Activethealarmisstillactiveanditisnotpossibletoresetit
Resetthealarmisnotactiveanditispossibletoresetit
Manualresetprocedure:
•usekeystoselectthealarm
•presstoresetthealarm