Emerson IC200CX EVO - Clock and Time Bands

IC200CXEVO
usermanual
42
11.4Clockandtimebands
Ifgivingpowersupplythebottomdisplayshows“rtC”alternatedwithatemperatureorpressure
value,Itisnecessarytosettheinternalclock.
3secondi
Pressthebutton:thehourstartstoflash.
Usethearrowkeystoadjustit.Pushonetime
toconfirm;automaticallythedisplayshowsnext
parameter.
RepeattheoperationsforalltheRTCparameters:
Min:minutes(0÷60)
UdAy:dayoftheweek
Sun=Sunday
Mon=Monday
tuE=Tuesday
UEd=Wednesday
tHu=Thursday
Fri=Friday
SAt=Saturday)
dAy:dayofthemonth(0÷31)
MntH:month(1÷12)
yEAr:year(00÷99)
Timebands
Withthecontrollerinternalclock,thesecondsetpointcanbeactivatedthroughtimebandinsteadof
activationfromdigitalinput.
Itisalsopossibletosetautomaticswitchingon/offfromtimeband.
Duringactivationofthedoublesetpoint,theunitworksatthefollowingsetpointanddifferential
values:
• inchillermode:setpointSt01+ES14,differentialES15
• inheatpumpmode:setpointSt04+ES16,differentialES17
Theworkingsetpointmaybecompensatedbasedontheoutsideairiftherelevantfunctionisactive.