Emerson Liebert GXT3 User Manual

Battery Cabinet
32
8.0 BATTERY CABINET
Optional battery cabinets are available for the Liebert
®
GXT3
™
. The external battery connector and
input breaker are on the battery cabinet’s rear panel, as shown in Figure 25. For battery cabinet
specifications, refer to Table 13.
Figure 25 Battery cabinet
!
WARNING
Do not contact the external battery connector and ground without wearing protective gloves
and clothing and taking other precautions against electrical shock. The battery loop and AC
input are not insulated, which may cause a dangerous voltage between the external battery
connector and ground.
NOTE
External battery connectors are wired in parallel. Either connector can be connected to the UPS
or to another battery cabinet.
NOTE
The length of the standard battery cable delivered with the battery cabinet is 0.65m (2.13ft).
External Battery
Connector
Input Breaker

Emerson Liebert GXT3 Specifications

General

Model	Liebert GXT3
Relative Humidity	0-95% non-condensing
Type	Online Double Conversion
Input Frequency	50/60 Hz
Output Frequency	50/60Hz ±0.1%
Power Factor	0.9
Form Factor	Tower or Rackmount
Battery Type	Sealed Lead-Acid (SLA)
Communication Interface	RS-232, USB
Operating Temperature	0° to 40°C (32° to 104°F)
Storage Temperature	-15°C to 40°C (5°F to 104°F)
Dimensions	Varies depending on the specific model
Weight	Varies depending on the specific model
Certifications	UL, cUL, CE, RoHS