Emerson Micro Motion 1000 Series

240 Micro Motion Series 1000 and Series 2000 Transmitters
Menu Flowcharts – Model 2700 CIO Transmitters
Figure G-3 ProLink II configuration menu continued
Analog output
Primary/secondary output
• PV/SV is
• Lower range value
• Upper range value
• AO cutoff
• AO added damp
•LSL
•USL
•Min span
• AO fault action
• AO fault level
• Last measured value timeout
Frequency
• Tertiary variable
• Scaling method
•Freq factor
• Rate factor
• Pulses per unit
• Units per pulse
• Freq pulse width
• Last measured value timeout
• Freq fault action
• Freq output mode
• Freq output polarity
Discrete input
• Assignment
•Polarity
ProLink >
Configuration
Channel
Channel B
• Type assignment
• Power type
Channel C
• Type assignment
• Power type
Additional configuration options
Discrete output
Discrete output 1/2
• DO1/2 assignment
•DO1/2 polarity
• DO1/2 fault action
Sensor simulation
• Enable/disable
Mass flow
• Wave form
• Fixed value
•Period
• Minimum
•Maximum
Density
• Wave form
• Fixed value
•Period
• Minimum
•Maximum
Temperature
• Wave form
• Fixed value
•Period
• Minimum
•Maximum