Emerson Rosemount 3095 - Installation Flowchart

Reference Manual
00809-0100-4716, Rev JA
May 2008
Rosemount 3095 MultiVariable
2-2
INSTALLATION
FLOWCHART
RECEIVING AND
INSPECTING
Depending on the system ordered, the 3095 arrives in as many as three
different shipping containers:
3095 MultiVariable Transmitter
This box contains the 3095 transmitter. If ordered, this package also
contains an RTD cable and optional mounting hardware.
3095 Engineering Assistant Software Package (Accessory)
The complete Engineering Assistant Software Package includes two
installation CD-ROMs and optional HART modem and cables. Engineering
Assistant components may also be ordered separately.
RTD Assembly (Optional)
This box contains the optional Series 68 or Series 78 RTD Assembly and
the Sensor Wiring Instruction Sheet.
A
B
B
START
A
B
Review Rosemount
drawing 03095-1025
or 03095-1024
(see Appendix B: Approval
Drawings)
Review Rosemount
drawings 03095-1020 or
03095-1021
(see Appendix B:
Approval Drawings)
Hazardous
Location?
Non-
Incendive
Location?
Unpack the
3095
Review the
3095 Manual
Bench
Configure?
BENCH CONFIGURE
Connect Bench
Power Supply
Connect a Personal
Computer or a HART
Communicator
Perform Bench
Configuration Tasks
(Optl.) Perform
Bench Calibration
Tasks
FIELD
INSTALLATION
Review Installation
Considerations
Mount
Transmitter
Make Process
Connections
DONE
Yes
Yes
No
No
Yes
No
(Optl.) Perform
Field Calibration
Tasks
Configuration
Performed?
No
Perform
Configuration
Tasks
Yes
Check
for Leaks
(Optional) Install
RTD Assembly