Reference Manual
00809-0100-4716, Rev JA
May 2008
Rosemount 3095 MultiVariable
www.rosemount.com
FIELDBUS
Section 4 FOUNDATION Fieldbus
Configuration
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1
Engineering Assistant Software . . . . . . . . . . . . . . . . . . . . page 4-2
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-10
Function Block Overview . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-12
Resource Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-14
Sensor Transducer Block . . . . . . . . . . . . . . . . . . . . . . . . . page 4-19
Mass Flow Transducer Block . . . . . . . . . . . . . . . . . . . . . . page 4-20
LCD Transducer Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-20
Analog Input (AI) Block . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-22
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-26
OVERVIEW This section covers basic operation, software functionality, and basic
configuration procedures for the 3095 Multivariable™ Transmitter with
F
OUNDATION Fieldbus. This section is organized by block information. For
detailed information about the function blocks used in the 3095, refer to “Block
Information” on page D-1 and the F
OUNDATION Fieldbus Block manual
00809-0100-4783.
SAFETY MESSAGES Instructions and procedures in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
potentially raises safety issues is indicated by a warning symbol ( ). Please
refer to the following safety messages before performing an operation
preceded by this symbol.
To Next Page