Reference Manual
00809-0100-4716, Rev JA
May 2008
Rosemount 3095 MultiVariable
www.rosemount.com
Section 1 Introduction
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Service Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2
USING THIS MANUAL This manual provides installation, configuration, calibration, troubleshooting,
and maintenance instructions for the Rosemount
®
3095 MultiVariable™ Mass
Flow Transmitter and for its operation with the 3095 MultiVariable Engineering
Assistant Software.
This manual was developed with the assumption that the user will have a
basic understanding of FOUNDATION Fieldbus concepts and wiring practices
if needed.
Information is available at www.plantweb.emersonprocess.com/university or
check with your system integrator about resources for your specific host
system.
The manual consists of the following sections:
Section 2: Installation
Explains how to install the 3095. It includes an installation flowchart,
installation considerations, and field installation procedure.
Section 3: HART Commissioning
Explains how to use the configuration software. This includes installing the
software onto a personal computer, establishing communications with the
3095, configuring the transmitter, creating a configuration file, and calibrating
the flow transmitter. This section also explains the configuration software
menus.
Section 4: Foundation Fieldbus Configuration
Section 5: Troubleshooting
If a malfunction is suspected, this section describes how to verify that the
transmitter hardware and process connections are in good working order.
Appendix A: Specifications and Reference Data
Contains specifications, dimensional drawings, and ordering information.
Appendix B: Product Certifications
Contains Hazardous Certificates, Factory Mutual (FM) and Canada Standards
Association (CSA) certified drawings.
Appendix C: Critical Alarms for Previous Software Revisions
Appendix D: Block Information
To Next Page
Loading...
