Emerson Rosemount 3095 - Page 73

Reference Manual
00809-0100-4716, Rev JA
May 2008
3-43
Rosemount 3095 MultiVariable
HART
Table 3-4. Primary Element Options
(1)
Figure 3-34. Primary Element
Selection
Annubar Orifice Plate
Annubar
®
Diamond II (Discontinued 1999) 1195 Integral Orifice
Annubar
®
Diamond II+ / Mass ProBar 1195 Mass ProPlate
Calibrated Annubar
®
Diamond II (Discontinued 1999) 1195 Mass ProPlate, Calibrated Cd
Calibrated Annubar
®
Diamond II + / Mass ProBar 1195 Mass ProPlate, Cd with Bias
485 Annubar
®
/ 3095MFA Mass ProBar 2½ D & 8D Taps, ASME
485 Annubar
®
/ 3095MFA Mass ProBar, Constant K Calibrated Cd: 2½ D & 8D Taps
Calibrated 485 Annubar
®
/ 3095MFA Mass ProBar Calibrated Cd: Flange, Corner, D & D/2 Taps
Constant Cd: 2.5D & 8D Taps
Nozzle Constant Cd: Flange, Corner, D & D/2 Taps
Long Radius Wall Taps, ASME Corner Taps, ASME
Long Radius Wall Taps, ISO Corner Taps, ISO
ISA 1932, ISO Corner Taps, ISO 99 Amendment 1
Calibrated Cd D & D/2 Taps, ASME
Constant Cd D & D/2 Taps, ISO
D & D/2 Taps, ISO 99 Amendment 1
Venturi Flange Taps, AGA
Nozzle, ISO
Flange Taps, ASME
Rough Cast/Fabricated Inlet, ASME Flange Taps, ISO
Rough Cast Inlet, ASME
Flange Taps, ISO 99 Amendment 1
Machined Inlet, ASME Small Bore Orifice, Corner Taps, ASME
Machined Inlet, ISO
Small Bore Orifice, Flange Taps, ASME
Welded Inlet, ISO 405P Compact Orifice
Calibrated Cd 405C Compact Conditioning Orifice
Constant Cd 1595 Conditioning Orifice Plate, Corner Taps
1595 Conditioning Orifice Plate, D & D/2 Taps
Other 1595 Conditioning Orifice Plate, Flange Taps
Area Averaging Meter Calibrated Cd: Flange, Corner, D & D/2 Taps: ISO-5167 (2002)
Standard V-Cone
®
Constant Cd: Flange, Corner, D & D/2 Taps: ISO-5167 (2002)
Wafer-Cone
®
Corner Taps, ISO-5167 (2002)
Calibrated Standard V-Cone
®
D & D/2 Taps, ISO-5167 (2002)
Calibrated Wafer-Cone
®
Flange Taps, ISO-5167 (2002)
Wedge Meter
®
(1) List of available primaries is subject to change.