Program display screenFigure 5-2:
A. Indicates HART or FOUNDATION Fieldbus digital communiciations
B. Conductivity value
C. Units of display
D. Active menu: CALIBRATE, PROGRAM, or DIAGNOSE
E. Sub-menus, prompts, and diagnostic messages appear here.
F. Available commands for sub-menus, prompts, or diagnostic messages
G. Appears when transmitter is in hold
H. Appears when a disabling condition has occurred
5.2 Infrared remote control (IRC)
The IRC is used to read diagnostics messages, calibrate connected sensors, and program
the transmitter. It must be held within 6 feet of the transmitter and less than 15 degrees
from the horizontal of the display window.
Display and operation
20 Rosemount 5081
To Next Page
Loading...
