Emerson Process Management GmbH & Co. OHGS-4
X-STREAM Non-Incendive
Instruction Manual
HASXENE-IM-EX
12/2014
Symbols Used On And Inside The Unit
This symbol at the instrument ... ... indicates
dangerous voltages may be accessible. Remo-
ving covers is permitted only, if the instrument is
disconnected from power - and even in this case
by qualifi ed personnel only!
hot surfaces may be accessible. Removing
covers by qualifi ed personnel is permitted only,
if the instrument is disconnected from power.
Nevertheless several surfaces may remain hot
for a limited time.
more detailled information available: see in-
struction manual before proceeding!
more detailled information available: see in-
struction manual before proceeding!
Wherever one or more of the following symbols appear on or inside the instrument, be careful
and read the instructions given in the accompanying manuals!
Follow these warnings and notes carefully
to minimize risks.
Defi nitions
To Next Page
Loading...
Need help?
General
