Emerson X-STREAM Series

Emerson Process Management GmbH & Co. OHG3-28
X-STREAM Non-Incendive
Instruction Manual
HASXENE-IM-EX
12/2014
3.10 Web Browser
IP address for Ethernet1 connector
Info
Firmware 1.0
DSP version 1.0
Serial no 123456789
Components..
Installed options..
Ethernet1 IP 123.456.78.9
Ethernet2 IP 192.168.1.2
 Time
10/01/10 14:00
Fig. 3-6: Ethernet Connectors
To gain access to the instrument´s web brow-
ser interface, fi rst ensure the instrument is
powered and connected to your network via
Ethernet1 connector (Fig. 3-6)
By factory default settings the analyzer is
confi gured to receive a valid network address
by a DHCP server.
Next enter INFO, to check if the instrument
has been assigned a valid network IP address:
If no network IP address has been assigned,
check the network settings (
X-STREAM
Enhanced instruction manual)
I
I
I
I
I
I
c
Ethernet1 connector
Ethernet2 connector
Field housings Table top analyzers
3.10.1 Connection via network
Connect your computer to the network, open
a web browser and enter the instrument´s IP
address. If everything is confi gured properly,
the analyzer's logon screen shows up (
page 3-30).
3.11 Web Browser