Emerson X-STREAM Series User Manual

ESSENTIAL INSTRUCTIONS
READ THIS PAGE BEFORE PROCEEDING!
Emerson Process Management (Rosemount Analytical) designs, manufactures and tests
its products to meet many national and international standards. Because these instruments
are sophisticated technical products, you MUST properly install, use, and maintain
them to ensure they continue to operate within their normal specifi cations. The following
instructions MUST be adhered to and integrated into your safety program when installing,
using and maintaining Emerson Process Management (Rosemount Analytical) products.
Failure to follow the proper instructions may cause any one of the following situations
to occur: Loss of life; personal injury; property damage; damage to this instrument; and
warranty invalidation.
 Read all instructions prior to installing, operating, and servicing the product.
 If you do not understand any of the instructions, contact your Emerson Process
Management (Rosemount Analytical) representative for clarifi cation.
 Follow all warnings, cautions, and instructions marked on and supplied with the
product.
 Inform and educate your personnel in the proper installation, operation, and
maintenance of the product.
 Install your equipment as specifi ed in the Installation Instructions of the
appropriate Instruction Manual and per applicable local and national codes.
Connect all products to the proper electrical and pressure sources.
 To ensure proper performance, use qualifi ed personnel to install, operate, update,
program, and maintain the product.
 When replacement parts are required, ensure that qualifi ed people use replacement
parts specifi ed by Emerson Process Management (Rosemount Analytical).
Unauthorized parts and procedures can affect the product’s performance, place the
safe operation of your process at risk, and VOID YOUR WARRANTY. Look-alike
substitutions may result in fi re, electrical hazards, or improper operation.
 Ensure that all equipment doors are closed and protective covers are in place,
except when maintenance is being performed by qualifi ed persons, to prevent
electrical shock and personal injury.
The information within this document
is subject to change without notice.
6
th
Edition 12/2014
Original Instruction Manual for the purpose
of the European Directive 94/9/EC.
Rosemount Analytical
Process Gas Analyzer Center of Excellence
Emerson Process Management GmbH & Co. OHG
Industriestrasse 1
63594 Hasselroth
Germany
T +49 6055 884 0
F +49 6055 884 209

Emerson X-STREAM Series Specifications

General

Brand	Emerson
Model	X-STREAM Series
Category	Measuring Instruments
Language	English