EAOM-210 FLJ.eng / ver 0.0
Pages 5 / 132
• Generator active power P2 (kW)
• Generator active power P3 (kW)
• Generator total active power (kW)
• Generator reactive power Q1 (kVAr)
• Generator reactive power Q2 (kVAr)
• Generator reactive power Q3 (kVAr)
• Generator total reactive power (kVAr)
• Generator active energy (kWh)
• Generator reactive energy (kVArh)
• Generator power factor PF1
• Generator power factor PF2
• Generator power factor PF3
• Load current (IL1, IL2, IL3, IT)
• Earth current (IEA)
It controls:
• Engine fuel supply or engine stopping
• Starter motor
• Alarm horn
• Automatic generator start and load transfer on mains failure
• Mains Open, Mains Close, Generator Open and Generator Close contactors
EAOM-210 FLJ features a 128x64 Dot-matrix LCD display, including:
• Mains volts (L1-N, L2-N, L3-N)
• Mains volts (L1-L2, L2-L3, L3-L1)
• Mains phase-phase average volt
• Mains phase-neutral average volt
• Mains Hz
• Generator volts (L1-N, L2-N, L3-N)
• Generator volts (L1-L2, L2-L3, L3-L1)
• Generator phase-phase average volt
• Generator phase-neutral average volt
• Generator apparent power S1 (kVA)
• Generator apparent power S2 (kVA)
• Generator apparent power S3 (kVA)
• Generator total apparent power (kVA)
• Generator active power P1 (kW)
• Generator active power P2 (kW)
• Generator active power P3 (kW)
• Generator total active power (kW)
• Generator reactive power Q1 (kVAr)
• Generator reactive power Q2 (kVAr)
• Generator reactive power Q3 (kVAr)
• Generator total reactive power (kVAr)
• Generator active energy (kWh)
• Generator reactive energy (kVArh)
• Generator power factor PF1
• Generator power factor PF2
• Generator power factor PF3
To Next Page
Loading...
