Repair Cerabar PMC11, PMC21, PMP11, PMP21, PMP23
28 Endress+Hauser
10 Repair
10.1 General notes
10.1.1 Repair concept
Repairs are not possible.
10.2 Return
The measuring device must be returned if the wrong device has been ordered or delivered.
As an ISO-certified company and also due to legal regulations, Endress+Hauser is obliged
to follow certain procedures when handling any returned products that have been in
contact with medium. To ensure swift, safe and professional device returns, please read
the return procedures and conditions on the Endress+Hauser website at
www.services.endress.com/return-material
To Next Page
Loading...
