Installation Deltabar S FOUNDATION Fieldbus
18 Endress+Hauser
4.3.5 Seal for flange mounting
Distorted measurement results.
The seal is not allowed to press on the process isolating diaphragm as this could affect the
measurement result.
‣ Ensure that the seal is not touching the process isolating diaphragm.
A0017743
Fig. 3:
1 Process isolating diaphragm
2Seal
4.3.6 Heat insulation – FMD77
See operrating instructions.
4.3.7 Wall and pipe-mounting (optional)
Endress+Hauser offers the following mounting brackets for installing the device on pipes or
walls:
To Next Page
Loading...
