Operation Deltabar S FOUNDATION Fieldbus
34 Endress+Hauser
P01-xxxxxxxx-19-xx-xx-en-027
1. Press "+" or "–" to enter the editing mode.
2. The first digit is highlighted in black.
P01-xxxxxxxx-19-xx-xx-en-028
1. Use the "+" key to change the digit "2" to "3".
2. Press the "E" key to confirm "3". The cursor goes to
the next position (highlighted in black).
P01-xxxxxxxx-19-xx-xx-en-029
The decimal point is highlighted in black. This means
you can now edit this digit.
P01-xxxxxxxx-19-xx-xx-en-030
1. Press "+" or "–" until "0" is displayed.
2. Press the "E" key to confirm "0".
The cursor goes to the next position. is
displayed and highlighted in black. See next
graphic.
P01-xxxxxxxx-19-xx-xx-en-031
Press "E" to save the new value and exit the editing
mode. See next graphic.
P01-xxxxxxxx-19-xx-xx-en-032
The new value for the damping is 30.0 s.
– Go to the next parameter with "E" .
– Press "+" or "–" to go back to the editing mode.
Onsite display Operation
To Next Page
Loading...
