Deltabar S FOUNDATION Fieldbus Operation
Endress+Hauser 33
6.4.2 Selecting an option
Example: Selecting the "Pressure" measuring mode.
6.4.3 Editing a value
Example: changing the DAMPING VALUE function from 2.0 s to 30.0 s. ä 29, Section 6.2.3
"Function of the operating elements – onsite display connected".
Onsite display Operation
MEASURINGMODE_Flow
"Flow" has been selected as the measuring mode. The
option currently active is indicated by a 3in front of the
menu text.
MEASURINGMODE_Press
Use "+" or "–" to select "Pressure" as the operating mode.
MEASURINGMODE_Press-1
1. Press "E" to confirm your choice. The option
currently active is indicated by a 3 in front of the
menu text. (The "Pressure" measuring mode is
selected.)
2. Go to the next menu item with "E" .
Onsite display Operation
P01-xxxxxxxx-19-xx-xx-en-023
The onsite display indicates the parameter to be
modified. The value highlighted in black can be
modified. The unit "s" is prespecified and cannot be
changed.
To Next Page
Loading...
