Commissioning
57
6.5.2 Main menu - Signal analysis
Function only visible if a digital input was activated as a counter or the option "Integration +
Analysis" is activated and signal analysis is activated in the set up!
As an option, it is also possible to perform signal analysis for analog inputs (option "Integration +
Analysis" with activated integration for analog inputs).
Display of the last 7 intermediate, daily, monthly, yearly analyses (so long as they are available).
The digital input is displayed as the respective counter or operating time counter.
When using analog inputs, the min. value, max. value, average value and, if applicable, the
integrated meter reading are output ("Integration + Analysis" option).
Fig. 49: Main menu, "Signal analysis"
Once an analysis is selected, it appears on the display.
6.5.3 Main menu - Search in trace
Search for events or times in the internal memory.
Fig. 50: Main menu, "Search in trace"
"Search in trace" menu
items
Description
(Factory setting bold marked)
Search criteria You can search for a specific time or event in the memory.
When searching for a "time" the graphic display shows from this time.
When searching for an "event" the ones found are displayed as a list.
Date
only at search criteria "time"
Enter the required date. Factory setting: actual date
Time
only at search criteria "time"
Enter the required time. Factory setting: actual time
To Next Page
Loading...