Installation
8
3 Installation
3.1 Incoming acceptance, transport, storage
3.1.1 Incoming acceptance
After receiving the goods, check the following points:
• Is the packaging or the contents damaged?
• Is the delivery complete? Compare the goods delivered with what you ordered.
3.1.2 Transport and storage
Observe the following points:
• The unit must be packed in shockproof packaging for storage (and transport). The original
packaging offers the best protection for this.
• The permitted storage temperature is -20 to +60 °C (-4 to 140 °F)
3.2 Installation conditions
Working temperature range:
0 to 50 °C (32 to 122 °F), max. 75% rel. humidity without condensation.
"
Caution!
• To avoid heat accumulation, please always ensure that the unit is sufficiently cooled.
• Maintain distance from strong magnetic fields (see Section 10 "Technical data", interference
immunity )
• Environment at front in accordance with unit ingress protection IP 54
3.3 Installation instructions
3.3.1 Mounting tool
To install the control panel, all you need is a screwdriver.
To Next Page
Loading...
Need help?
General