iTEMP TMT142B Operating menu and parameter description
Endress+Hauser 89
Description Use this function to enter the current password in order to delete the existing password.
The Define password button then appears.
User entry 1. Activate the Delete password button.
2. . . . . . . . . (enter the existing password)
14.3.3 Submenu: Bluetooth configuration
Bluetooth
Navigation System → Bluetooth configuration → Bluetooth
Description Use this function to enable or disable the Bluetooth® function.
• Off: The Bluetooth® interface is disabled immediately.
• On: The Bluetooth® interface is enabled and a connection to the device can be
established.
The Bluetooth® interface is only available if the CDI interface is not used.
Options • Off
• On
Factory setting On
Bluetooth status
Navigation System → Bluetooth configuration → Bluetooth status
Description Displays whether the Bluetooth® function is available. Bluetooth® communication is only
possible if the CDI interface is not used.
User interface Three states can be displayed:
• Disabled by software
• Disabled by hardware
• Blocked by CDI
Change Bluetooth password
1)
1) Function is only visible in the SmartBlue app
Navigation System → Bluetooth configuration → Change Bluetooth password
Description Use this function to change the Bluetooth® password. This function is visible in the
SmartBlue app only.
To Next Page
Loading...
