iTEMP TMT142B Operating menu and parameter description
Endress+Hauser 93
HART descriptor
Navigation System → Information → HART info → HART descriptor
Description Use this function to define a description for the measuring point.
User entry Up to 16 alphanumeric characters (uppercase letters, numbers and special characters)
Factory setting 16 x '?'
HART message
Navigation System → Information → HART info → HART message
Description Use this function to define a HART message which is sent via the HART protocol when
requested by the master.
User entry Up to 32 alphanumeric characters (uppercase letters, numbers and special characters)
Factory setting 32 x '?'
Hardware revision
Navigation System → Information → HART info → Hardware revision
Description Displays the hardware revision of the device. The hardware revision is also transmitted in
command 0.
Software revision
Navigation System → Information → HART info → Software revision
Description Displays the software revision of the device. The software revision is also transmitted in
command 0.
HART date code
Navigation System → Information → HART info → HART date code
Description Use this function to define date information for individual use.
To Next Page
Loading...
