Operating menu and parameter description iTEMP TMT142B
94 Endress+Hauser
User entry Date in the format year-month-day (YYYY-MM-DD)
Factory setting 2010-01-01
1)
1) Also 01.01.2010 depending on the operating tool
Manufacturer ID
Navigation System → Information → HART info → Manufacturer ID
Description Displays the manufacturer ID under which the device is registered with the FieldComm
Group.
User interface 4-digit hexadecimal number
Factory setting 0x0011
Device ID
Navigation System → Information → HART info → Device ID
Description A unique HART identifier is saved in the device ID and used by the control systems to
identify the device. The device ID is also transmitted in command 0. The device ID is
determined unambiguously from the serial number of the device.
User interface ID generated for specific serial number
Submenu: Device location
Latitude
Navigation System → Information → Device location → Latitude
Description Use this function to enter the latitude coordinates that describe the device location.
User entry –90.000 to +90.000 °
Factory setting 0°
Longitude
Navigation System → Information → Device location → Longitude
To Next Page
Loading...
