Endress+Hauser iTEMP TMT142B - Page 97

iTEMP TMT142B Operating menu and parameter description
Endress+Hauser 97
Decimal places 1 (decimal places 2 or 3)
Navigation System → Display → Format display → Decimal places 1 (Decimal places 2 or 3)
Prerequisite A measured value is defined in the parameter Value 1 display (Value 2 or 3 display).
Description Use this function to select the number of decimal places for the display value. This setting
does not affect the accuracy of the device for measuring or calculating the value.
If Automatic is selected, the maximum possible number of decimal places is always
shown on the display.
Options • x
• x.x
• x.xx
• x.xxx
• x.xxxx
• Automatic
Factory setting Automatic
Display text 1 (2 or 3)
Navigation System → Display → Display text 1 (2 or 3)
Description Display text for this channel that appears on the screen in the 14-segment display.
User entry Enter the display text: the maximum text length is 8 characters.
Factory setting • Display text 1: PV
• Display text 2 or 3: ----- (no text)