Commissioning Liquiline CM442R/CM444R/CM448R
50 Endress+Hauser
9.2.2 Display settings
Path: Menu/Operation/Display
Function Options Info
Contrast 5 to 95 %
Factory setting
50 %
Adjust the screen settings to suit your working
environment.
Backlight="Automatic"
The backlighting is switched off automatically after a
short time if a button is not pressed. It switches back on
again as soon as you press the navigator button.
Backlight="On"
The backlighting does not switch off automatically.
Backlight Options
•On
•Off
•Automatic
Factory setting
Automatic
Screen rotation Options
•Manual
•Automatic
Factory setting
Manual
If "Automatic" is selected, the single-channel measured
value display switches from one channel to the next
every second.
User definable screens
Meas. screen 1
...
Meas. screen 6
You can create 6 measuring screens of your own and
give them a name.
As the functions are the same for all 6 measuring
screens, only one measuring screen is described below.
Meas. screen Options
•Off
•On
Factory setting
Off
Once you have defined your own measuring screen, you
can switch it on here. You can find the new screen under
"User definable screens" in the "All measured values"
measuring mode.
Label Customized text, 20
characters
Name of the measuring screen
Appears in the status bar of the display.
Number of lines 1 to 8
Factory setting
1
Specify the number of measured values displayed.
Line 1
...
Line 8
As the following functions are the same for all the lines,
they are only described once.
Signal type Options
• Source of data
•Output
Factory setting
Source of data
Select a source of data or an output as the signal type.
To Next Page
Loading...
