Liquiline CM442R/CM444R/CM448R Commissioning
Endress+Hauser 51
Source of data
Signal type= "Source
of data"
Options
•None
•Sensor inputs
• Controller
• Current inputs
• Fieldbus signals
•Mathematical functions
Factory setting
None
Select a data source. You can choose from connected
sensors, available controllers, current inputs, fieldbus
signals and mathematical functions.
Output
Signal type= "Output"
Options
•None
•Binary outputs
• Current outputs
•Relays
Factory setting
None
Select an output. You can choose from binary outputs,
current outputs and relays.
Measured value Options
• Depends on the source of
data or output
Factory setting
None
You can display different measured values depending on
the source of data or output.
Label Customized text, 20
characters
User-defined name for the parameter to be displayed
Set label to "%0V"
1)
Action If you perform this action you accept the parameter
name that is automatically suggested.
Your own parameter name ("Label") is lost!
1) "%0V" here stands for text that depends on the context. This text is generated automatically by the software and
inserted in place of %0V. In the simplest situations, the generated text could be the name of the measuring
channel, for example.
Path: Menu/Operation/Display
Function Options Info
To Next Page
Loading...
