Device description Liquiline CM442/CM444/CM448
10 Endress+Hauser
3.3 Device architecture
3.3.1 Slot and port assignment
a0019832
a0019833
Fig. 3: Slot and port assignment of the hardware modules
Fig. 4: Slot and port assignment on the display
• Inputs are assigned to measuring channels in
ascending order of the slots and ports.
Adjacent example:
If "CH1: 1:1 pH glass" is displayed, this means:
Channel 1 (CH1) is slot 1 (base module) : port 1
(input 1), pH glass sensor
• The outputs and relays are named after their
function, e.g. "Current output", and are displayed with
the slot and port numbers in ascending order
To Next Page
Loading...
