Endress+Hauser Liquiline CM444 - Input

Liquiline CM442/CM444/CM448 Technical data
Endress+Hauser 155
15 Technical data
15.1 Input
15.1.1 Measured variables
--> Documentation of the connected sensor
15.1.2 Measuring ranges
--> Documentation of the connected sensor
15.1.3 Input types
• digital sensor inputs for sensors with Memosens protocol
• Analog current inputs (optional)
• Digital inputs (optional)
15.1.4 Input signal
Depending on version
• Max. 8 x binary sensor signal
• 2 x 0/4 to 20 mA (optional), passive, potentially isolated from the sensor inputs and from one
another
• 0 to 30 V
15.1.5 Cable specification
Cable type
Memosens data cable CYK10 or fixed sensor cable, each with cable end sleeves or M12
round-pin connector
Cable length
Max. 100 m (330 ft)