EasyManua.ls Logo

Endress+Hauser Liquiline CM444 - Sensors

Endress+Hauser Liquiline CM444
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Liquiline CM442/CM444/CM448 Accessories
Endress+Hauser 145
14 Accessories
The most important accessories available at the time this document went to print are listed
below. Contact your service representative or Sales Center for accessories that are not listed
here.
14.1 Weather protection cover
CYY101 weather protection cover for field devices - absolutely essential if operating the unit
outdoors
Material: stainless steel 1.4301 (AISI 304)
•Order No. CYY101-A
14.2 Post mounting kit
CM44x post mounting kit
For securing the field housing to horizontal and vertical posts and pipes
Order No. 71096920
14.3 Measuring cable
Memosens data cable CYK10
For digital sensors with Memosens technology
pH, redox, oxygen (amperometric), chlorine, conductivity (conductive)
Order as per product structure (--> Online Configurator, www.products.endress.com/cyk10)
Technical Information TI00118C/07/EN
Memosens data cable CYK11
Extension cable for digital sensors with Memosens protocol
Order as per product structure (--> Online Configurator, www.products.endress.com/cyk11)
Measuring cable CYK81
Unterminated cable for extending sensor cables (e.g. Memosens)
2 x 2 cores, twisted with shielding and PVC sheath (2 x 2 x 0.5 mm
2
+ shielding)
Material sold by the meter, Order No.: 51502543

Table of Contents

Other manuals for Endress+Hauser Liquiline CM444

Related product manuals