Liquiline CM442/CM444/CM448 Commissioning
Endress+Hauser 53
Screen rotation Options
•Manual
•Automatic
Factory setting
Manual
If "Automatic" is selected, the single-channel measured
value display switches from one channel to the next
every second.
User definable screens
Meas. screen 1
to
Meas. screen 6
You can create 6 measuring screens of your own and
give them a name.
As the functions are the same for all 6 measuring
screens, only one measuring screen is described below.
Meas. screen Options
•Off
•On
Factory setting
Off
Once you have defined your own measuring screen, you
can switch it on here. You can find the new screen under
"User definable screens" in the "All measured values"
measuring mode.
Label Customized text, 20
characters
Name of the measuring screen
Appears in the status bar of the display.
Number of lines 1 to 8
Factory setting
1
Specify the number of measured values displayed.
Line 1
to
Line 8
As the following functions are the same for all the lines,
they are only described once.
Signal type Options
• Source of data
•Output
Factory setting
Source of data
Select a source of data or an output as the signal type.
Source of data
Signal type= "Source
of data"
Options
•None
•Sensor inputs
• Controller
• Current inputs
• Fieldbus signals
•Mathematical functions
Factory setting
None
Select a data source. You can choose from connected
sensors, available controllers, current inputs, fieldbus
signals and mathematical functions.
Output
Signal type= "Output"
Options
•None
•Binary outputs
• Current outputs
•Relays
Factory setting
None
Select an output. You can choose from binary outputs,
current outputs and relays.
Path: Menu/Display/Operation
Function Options Info
To Next Page
Loading...
