Operation Liquistation CSF33
104 Endress+Hauser
Source of data Measured value
Cond i Selection
• Temperature
• Conductivity
• Resistance
(only Cond c)
• Concentration
(only Cond i and Cond c 4-pol)
Cond c
Cond c 4-pol
Disinfection Selection
• Temperature
• Sensor current
• Concentration
ISE Selection
• Temperature
• pH
• Ammonium
• Nitrate
• Potassium
• Chloride
TU/TS Selection
• Temperature
• Turbidity g/l
(only TU/TS)
• Turbidity FNU
(only TU/TS)
• Turbidity Formazine
(only TU)
• Turbidity solid
(only TU)
TU
Nitrate Selection
• Temperature
• NO3
• NO3-N
Ultrasonic interface Selection
• Temperature
• Interface
• Turbidity
SAC Selection
• Temperature
• SAC
• Transm.
• Absorption
• COD
• BOD
Selection
• Bipolar
(only for current outputs)
• Unipolar+
• Unipolar-
Mathematical
functions
All the mathematical functions can also be used as a data source and the calculated
value can be used as the measured value.
10.5.3 Alarm relays and optional relays, functions of the optional
binary outputs
The basic version of the device always has one alarm relay. Additional relays are also
available depending on the version of the device.
To Next Page
Loading...
