Operation Liquistation CSF33
94 Endress+Hauser
Menu/Setup/Sampling programs/Setup program/New
Function Entry for sample program
Multiple bottles 0
Enable subprogram Event
Start condition No delay
Activation event
Number of events 1
Event Editor 1
Source of data CH1: 1:1 pH glass
Measured value pH
Operating mode Upper limit
Limit value pH 8.00
Hysteresis pH 0.20
Start delay 0 s
Switch off delay 0 s
Sample at enable Yes
Sample at disable No
Deactivation Enable invalid
Synchronize samplings To subprogram start
‐> "SAVE" ‐> "ESC" ‐> "ESC"
Bottle assignment
Bottle assignment table
Bottle 1
...
Bottle 12
Bottle 13
EE1
EE1
TD1
‐> "ESC"
Press the "SAVE" soft key to save the program.
In the overview, you can start the program created under "Select sampling program".
10.3.4 Selecting and executing the program
In the overview, under Select sampling program you can see all the programs created.
Here you can also use New to create a new program.
Using the navigator, you can select the program you want to execute here and then choose
from the following menu items:
• Edit
• Start
• Duplicate
• Cancel
Setup program
Function Info
Edit The selected program is displayed and can be edited. Press the "SAVE"
button to save the changes.
Delete The selected program is deleted following a confirmation prompt.
To Next Page
Loading...
