Liquisys M CPM223/253 Incoming acceptance and product identification
Endress+Hauser 7
2 Incoming acceptance and product
identification
2.1 Incoming acceptance
‣
Make sure the packaging is undamaged!
‣ Inform the supplier about any damage to the packaging.
Keep the damaged packaging until the matter has been settled.
‣ Make sure the contents are undamaged!
‣ Inform the supplier about damage to the contents. Keep the damaged products until the
matter has been settled.
‣ Check that the order is complete and agrees with your shipping documents.
‣ The packaging material used to store or to transport the product must provide shock
protection and humidity protection. The original packaging offers the best protection.
Also, keep to the approved ambient conditions (see "Technical data").
‣ If you have any questions, please contact your supplier or your local sales center.
2.2 Scope of delivery
The delivery of the field instrument includes:
• 1 transmitter CPM253
• 1 plug-in screw terminal
•1 cable gland Pg 7
• 1 cable gland Pg 16 reduced
• 2 cable glands Pg 13.5
• 1 Operating Instructions BA00194C/07/EN
•1 Operating Instructions
• versions with HART communication:
1 Operating Instructions Field Communication with HART, BA00208C/07/EN
• versions with PROFIBUS communication:
1 Operating Instructions Field Communication with PROFIBUS PA/DP, BA00209C/07/EN
The delivery of the panel mounted instrument includes:
• 1 transmitter CPM223
• 1 set of plug-in screw terminals
• 2 tensioning screws
• 1 BNC-plug (solder-free)
• 1 Operating Instructions BA00194C/07/EN
•1 Operating Instructions
• versions with HART communication:
1 Operating Instructions Field Communication with HART, BA00208C/07/EN
• versions with PROFIBUS communication:
1 Operating Instructions Field Communication with PROFIBUS PA/DP, BA00209C/07/EN
If you have any questions, please contact your supplier or your sales centre responsible.
To Next Page
Loading...
Need help?
General
