Endress+Hauser Micropilot FMR56 - Page 61

Micropilot FMR56, FMR57
Endress+Hauser 61
FMR57: dimensions of flanges
Process connection - flange
Dimensions ØD and b as per flange standard:
• EN1092-1 (suitable for DIN2527)
• ASME B16.5
• JIS B2220
UNI flange for FMR57
A
A
A
A
A-A
8 (0.31)
ø340 (13.4)
ø405 (15.9)
4x90°
6x60°
6x60°
ø26 (1.02)
ø26 (1.02)
ø29 (1.14)
ø358 (14.1)
ø294.5 (11.6)
ø80.3(3.16)
mm(in)
2
3
ø175 (6.89)
4x90°
4x90°
ø225 (8.86)
ø19 (0.75)
A A
ø185.5 (7.3)
1
ø23 (0.91)
A0018947
1 UNI flange DN100/4"/100A, p
abs
< 2 bar (29 psi), 316L
2 UNI flange DN200/8"/200A, p
abs
< 2 bar (29 psi), 316L
3 UNI flange DN250/10"/250A, p
abs
< 2 bar (29 psi), 316L
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.