Endress+Hauser Micropilot FMR56 - Page 67

Micropilot FMR56, FMR57
Endress+Hauser 67
FMR57
G
5
9
4
3
2
1
H I
4
9
4
3
2
1
J
7
9
3
2
1
A
B
5
6
44
3
2
1
E
F
5
6
4
8
4
3
2
C
D
6
7
4
3
2
1
A0018958
A Horn standard version with alignment unit and UNI flange
B Horn standard version with UNI flange
C Horn standard version with standard flange
D Horn standard version with threaded adapter
E Parabolic version with alignment unit and UNI flange
F Parabolic version with UNI flange
G Horn high-temperature version with alignment unit and UNI flange
H Horn high-temperature version with standard flange
I Horn high-temperature version with UNI flange
J Horn high-temperature version with threaded connection
Item Component part Material
1 Horn 316L (1.4404)
Screws A4
Process separation cone Standard: PEEK High temperature: PI
Seal Standard: FKM High temperature: graphite
2 Process separators 316L (1.4404)
Horn/parabolic adapter 316L (1.4404)
3 Pipe 316L (1.4404)
4 Flange 316L (1.4404/1.4435)
Adapter 316L (1.4404)
5 Bearing 316L (1.4404)
Screws A2
Spring ring 1.4310