Endress+Hauser Micropilot FMR67 - Page 31

Micropilot FMR67
Endress+Hauser V. 1, Rev. 3, 11-04-2017 31
A0032097

12 Micropilot FMR67 with alignment unit
Radial alignment of the antenna
Radial alignment of the antenna is not necessary because the effect of polarization is negligible due
to the narrow beam angle.
Information concerning nozzles
H
max
øD
A0032206
Inner nozzle diameterD Maximum nozzle height H
max
min. 80 mm (3 in) ≤200 mm (8 in)
100 mm (4 in) ≤300 mm (12 in)
150 mm (6 in) ≤500 mm (20 in)
Note the following if the antenna does not project out of the nozzle:
•
The end of the nozzle must be smooth and free from burrs. The edge of the nozzle should be
rounded if possible.
• Mapping must be performed.
• Please contact Endress+Hauser for applications with nozzles that are higher than indicated in
the table.