Technical data Proline Fieldcheck
40 Endress+Hauser
8.1.5 Mechanical construction
Design, dimensions
(length x width x height)
• Fieldcheck: 270 × 130 × 60 mm
• Simubox (without cable): 120 × 60 × 30 mm
• Softcase: 400 × 180 × 300 mm
Weight 1.6 kg
8.1.6 Human interface
Display elements Liquid crystal display: illuminated, adjustable contrast setting
for displaying different measured value and status variables
Operating elements Local operation with three optical keys (
S, O, F)
Computer interface FieldCare
• Permanent storage of data
• Printing of certificates
• Updating Fieldcheck software
CE mark The measuring system complies with the statutory requirements of the EC Directives.
Endress+Hauser confirms successful testing of the device by affixing the CE mark.
C-Tick mark The measuring system meets the EMC requirements of the "Australian Communications and Media
Authority (ACMA)".
Other standards and
guidelines
• EN 60529
Degrees of protection provided by enclosures (IP code)
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use
• IEC/EN 61326
"Emission in accordance with requirements for Class A equipment."
Electromagnetic compatibility (EMC requirements)
8.1.7 Ordering information
Your Endress + Hauser service organization will provide information on ordering and further details
on the order code.
8.1.8 Accessories
Various accessories can be supplied for Fieldcheck and they can be ordered separately from
Endress+Hauser ä 37. Your Endress+Hauser service organization will provide detailed
information on the order code of your choice.
To Next Page
Loading...
