Endress+Hauser Proline Fieldcheck - Block BASIC INFORMATION

Proline Fieldcheck Device functions - general section
Endress+Hauser 45
9.3 Block BASIC INFORMATION
9.3.1 Group DEVICE DATA
9.3.2 Group READ IN PARAMETERS
Block Group Function group Function
BASIC
INFORMATION 
DEVICE DATA
ä 45

DEVICE DATA
ä 45

READ IN
PARAMETERS
ä 45

READ IN
PARAMETERS
ä 45
Function description
BASIC INFORMATION  DEVICE DATA
DEVICE DATA Use this function to display the following information:
Display:
Measuring device type
Sensor
Diameter
Calibration factor
Serial number
Tag name
Function description
BASIC INFORMATION  READ IN PARAMETERS
READ IN PARAMETERS Use this function to transfer the complete data record from the measuring device to
Fieldcheck if, for example, you have changed parameters in the connected measuring
device.
!
Note!
This function is not available for thermal measuring devices (t-mass 65).
Options:
START
CANCEL