Endress+Hauser Proline Fieldcheck - Page 44

Device functions - general section Proline Fieldcheck
44 Endress+Hauser
BACK LIGHT Use this function to select whether the display is backlit.
Options:
ON (AUTOMATIC)
OFF
Factory setting:
ON (AUTOMATIC)
!
Note!
If the ON (AUTOMATIC) setting is selected, the lighting of the display is automatically
switched off if the device is not used for 10 minutes.
FORMAT DATE Use this function to select a date format.
Options:
DD.MM.YYYY
MM/DD/YYYY
Factory setting:
DD.MM.YYYY
!
Note!
The option selected will be stored permanently.
DATE Use this function to enter the date.
User input:
DD.MM.YYYY (MM/DD/YYYY)
FORMAT TIME Use this function to select a time format.
Options:
24H
12H (AM/PM)
Factory setting:
24H
!
Note!
The option selected will be stored permanently.
TIME Use this function to enter the time.
User input:
HH:MM
CHARGE COND.
BATTERY
Use this function to display the charging status of the NiMH battery.
Display:
30%
60%
90%
!
Note!
When operating Fieldcheck with the external plug-in power unit, the message "POWER
SUPPLY" is displayed.
Function description
USER INTERFACE  CONTROL