Proline Promag 50H, 53H
32 Endress+Hauser
Process connections with aseptic gasket seal (DN 2 to 25 / 1/12 to 1")
Adhesive fitting Sensor Fits to di G L H × B
PVC
5*H**-R/S***********
DN
[mm]
Pipe
[mm] [inch] [mm] [mm] [mm] [mm]
A0005566
2 to 8 ½" [inch] 21.5 27.3 38.5 62 × 42
2 to 8 20 × 2 [mm]
(DIN 8062)
20.2 27.0 38.5 62 × 42
15 20 × 2 [mm]
(DIN 8062)
20.2 27.0 28.0 62 × 42
• Fitting length = (2 × L) + 86 mm
• The requisite ground rings can be ordered as accessories
(Order No. DK5HR-****).
Weld socket for DIN Sensor Fits to di G L H × B
1.4404 / 316L
5*H**-U***********
DN
[mm]
Piping
DIN 11850 [mm] [mm] [mm] [mm]
A0003870
2 to 8 14 × 2 9 14 23.3 62 × 42
15 20 × 2 16 20 23.3 62 × 42
25 (DIN) 30 × 2 26 30 23.3 72 × 55
• Fitting length = (2 × L) + 86 mm
• If pigs are used for cleaning, it is essential to take the inside diameters of
measuring tube and process connection (di) into account!
Weld socket for ODT/SMS Sensor Fits to di G L H × B
1.4404 / 316L
5*H**-V***********
DN
[mm]
Piping
ODT/SMS [mm] [mm] [mm] [mm]
A0003871
2 to 8 12.7 × 1.65 9.0 12.7 16.1 62 × 42
15 19.1 × 1.65 16.0 19.1 16.1 62 × 42
25 (1" ANSI) 24.5 × 1.65 22.6 25.4 16.1 72 × 55
• Fitting length = (2 × L) + 86 mm
• If pigs are used for cleaning, it is essential to take the inside diameters of
measuring tube and process connection (di) into account!
Clamp ISO 2852, Fig. 2 Sensor Fits to
piping
Clamp
ISO 2850
di G L H × B
1.4404 / 316L
5*H**-W***********
DN
[mm]
ISO 2037 /
BS 4825-1
Diameter
[mm] [mm] [mm] [mm] [mm]
A0005560
25 (1" ANSI) Tube 24.5 × 1.65 25 22.6 50.5 44.3 72 × 55
• Fitting length = (2 × L) + 86 mm
• If pigs are used for cleaning, it is essential to take the inside diameters of
measuring tube and process connection (di) into account!
G
di
L
HxB
G
di
L
HxB
G
di
L
HxB
G
di
HxB
L
To Next Page
Loading...
