Endress+Hauser Proline Promag 53H - Page 42

Proline Promag 50H, 53H
42 Endress+Hauser
Flange DIN 11864-2 Sensor Fits to di G D L LK 1 LK 2
Aseptic flat flange, Form A
1.4404 / 316L
5*H**-4***********
DN
[mm]
Piping
DN 11850 [mm] [mm] [mm] [mm] [mm] [mm]
A0005546
40 42 × 2 3882926471.065
50 54 × 2 50 94 105 64 83.5 77
65 70 × 2 66 113 121 64 100.0 95
80 85 × 2 81 133 147 98 121.0 112
100 104 × 2 100 159 168 98 141.5 137
• – Fitting length for DN 40 to 65 = (2 × L) + 136 mm
– Fitting length for DN 80 to 100 = (2 × L) + 196 mm
• If pigs are used for cleaning, it is essential to take the inside diameters of
measuring tube and process connection (di) into account!
Coupling SMS 1145 Sensor Fits to
SMS
1145
di G D L LK
Threaded adapter; 1.4404 / 316L
5*H**-5***********
DN
[mm]
Piping
OD
Dia-
meter
[mm]
[mm] [mm] [mm] [mm] [mm]
A0005538
40 38.1 × 1.65 38.0 35.5 Rd 60 × 1/6" 92 63 71.0
50 50.8 × 1.65 51.0 48.5 Rd 70 × 1/6" 105 65 83.5
65 63.5 × 1.65 63.5 60.5 Rd 85 × 1/6" 121 70 100.0
80 76.2 × 1.65 76.0 72.0 Rd 98 × 1/6" 147 75 121.0
100 101.6 × 1.65 101.6 97.6 Rd 132 × 1/6" 168 70 141.5
• – Fitting length for DN 40 to 65 = (2 × L) + 136 mm
– Fitting length for DN 80 to 100 = (2 × L) + 196 mm
• If pigs are used for cleaning, it is essential to take the inside diameters of
measuring tube and process connection (di) into account!
Coupling ISO 2853 Sensor
Fits to
piping
ISO 2853 di G D L LK
Threaded adapter; 1.4404 / 316L
5*H**-6***********
DN
[mm]
ISO 2037 /
BS 4825-1
Diameter
[mm] [mm] [mm] [mm] [mm] [mm]
A0005542
40 38.0 × 1.6 38.0 35.6 50.6 92 61.5 71.0
50 51.0 × 1.6 51.0 48.6 64.1 105 61.5 83.5
65 63.5 × 1.6 63.5 60.3 77.6 121 61.5 100.0
80 76.1 × 1.6 76.1 72.9 91.1 147 61.5 121.0
100 101.6 × 2.0 101.6 97.6 118.1 168 61.5 141.5
• – Fitting length for DN 40 to 65 = (2 × L) + 136 mm
– Fitting length for DN 80 to 100 = (2 × L) + 196 mm
• If pigs are used for cleaning, it is essential to take the inside diameters of
measuring tube and process connection (di) into account!
L
G
di
D
LK 1
LK 2
D
LK
di
G
L
G
di
D
LK
L