Endress+Hauser Proline Prosonic Flow B 200 - Page 100

Operation Proline Prosonic Flow B 200 HART
100 Endress+Hauser
Navigation
"Diagnostics" menu → Measured values → Totalizer
‣
Totalizer
Totalizer value 1 to 3
Totalizer overflow 1 to 3
Parameter overview with brief description
Parameter Prerequsite Description User interface
Totalizer value 1 to 3 One of the following options is selected
in the Assign process variable
parameter (→  85) of the Totalizer 1
to 3 submenu:
• Volume flow
• Corrected volume flow
• Corrected methane volume flow
*
• Mass flow
• Energy flow
*
Displays the current totalizer counter
value.
Signed floating-point
number
Totalizer overflow 1 to 3 One of the following options is selected
in the Assign process variable
parameter (→  85) of the Totalizer 1
to 3 submenu:
• Volume flow
• Corrected volume flow
• Corrected methane volume flow
*
• Mass flow
• Energy flow
*
Displays the current totalizer overflow. Integer with sign
* Visibility depends on order options or device settings
11.3.4 Output values
The Output values submenu contains all the parameters needed to display the current
measured values for every output.
Navigation
"Diagnostics" menu → Measured values → Output values
‣
Output values
Output current 1
Measured current 1
Terminal voltage 1
Output current 2
Pulse output