Endress+Hauser prosonic flow 92 - Page 48

8 Accessories Prosonic Flow 92
48 Endress +Hauser
Installation set for Prosonic
Flow W, P, U sensors
Sensor fastening
(5)
Installation set for Prosonic
Flow W, P sensors
Mounting support tool
(6)
• Without sensor fastening
• Tensioning bands for U sensors DN 15...100
(0.6"...4")
• Tensioning bands for W sensors DN 50...1500
(2"...59")
• Tensioning bands for W sensors DN 1000...4000
(40"...160")
• Tensioning bands for W sensors DN 50...300
(2"...12")
• Without mounting support tool
• Variable spacing ruler DN 50...600 (4"...24")
• Traverse positioning tool, supports one traverse
sensor installation
DK9MC
− A*
DK9MC
− B*
DK9MC
− C*
DK9MC
− D*
DK9MC
− E*
DK9IC
− *1
DK9IC
− *2
DK9IC
− *3
Sensor cable set
(7)
For Prosonic Flow W, P, U sensors:
• 5 m BNC sensor cable, PVC, –20...+70 °C
(–4...165 °F)
• 10 m BNC sensor cable, PVC, –20...+70 °C
(–4...165 °F)
Only for Prosonic Flow W, P sensors:
• 5 m BNC sensor cable, PTFE, –40...+170 °C
(–40...340 °F)
• 10 m BNC sensor cable, PVC, –40...+170 °C
(–40...340 °F)
DK9SK
− A
DK9SK
− B
DK9BC
− E
DK9BC
− F
Carrying case
(8)
• Carrying case for transmitter, sensors and
accessories
50102921
Acoustic coupling fluid
(9)
• Wacker P –40...+80 °C (–40...175 °F)
• Coupling medium 0...+170 °C (32...340 °F),
standard
• Water-soluble coupling medium –20...+80 °C
(–4...175 °F)
• SilGel –40...+130 °C (–40...266 °F)
• Coupling medium –40...+80 °C (–40...175 °F),
standard, type MBG2000
DK9CM
− 1
DK9CM
− 2
DK9CM
− 4
DK9CM
− 5
DK9CM
− 7
Installation set, Clamp On
for Prosonic Flow W sensors
Tensioning bands for permanent installation on big
diameter pipes (DN 200...4000) suitable for use with
W sensor holders.
• Tensioning band DN 200...600 (8"...24")
• Tensioning band DN 600...2000 (24"...80")
• Tensioning band DN 2000...4000 (80"...160")
DK9IC
− C1
DK9IC
− D1
DK9IC
− E1
Accessory Description Order code