Prosonic Flow 92 10 Technical data
Endress+Hauser 59
Material Transmitter housing Prosonic Flow 92:
• Handheld housing: plastic case
Standard designations of the materials (measuring sensors P / W / U / DDU 18 /
DDU 19):
Sensor cables
• PVC / PTFE
10.1.9 Human interface
Display elements • Liquid crystal graphic display
240 x 320 dot (with backlight)
• Custom configurations for presenting different measured value and status variables
• Supported language for display: English, German, French, Italian and Spanish
Operating elements 9 pushbuttons:
ON, OFF, U, V, T, W, ESC, ENT, LIGHT
Serial communication RS-232C (not isolated)
• Transmission speed: max. 9600 BPS
• Max. cable length: 15 m
Logging functions:
• Site data (name, piping, fluid, sensor installation method, type of sensor) for up to
20 sites
• A maximum of 40000 data points (time, velocity, flow rate, totals, analog input, status)
can be stored in the memory.
DIN 17660 UNS
Standard sensor cable
– Cable connector (nickled brass)
– Cable sheath
2.0401
PVC
C38500
PVC
DIN 17440 AISI
Sensor housing W / P / DDU 18 / DDU 19 1.4301 304
Sensor holder W (Clamp on) 1.4308 CF-8
Sensor housing U (Clamp On) Plastic
Frame end-piece for U sensor Plastic
Sensor contact surface Chemical resistant plastic
Metal tensioning bands 1.4301 304
Tensioning bands textile
High temperature sensor cable
– Cable connector (stainless steel)
– Cable sheath
1.4301
PTFE
304
PTFE
DIN EN 573-3 ASTM B3221
U sensor fixation bar
– Cast aluminum EN AW-6063 AA 6063
To Next Page
Loading...
