10 Technical data Prosonic Flow 92
60 Endress+Hauser
10.1.10 Certificates and approvals
CE approval The measuring system is in conformity with the statutory requirements of the EC
Directives.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
Other standards and
guidelines
EN 60529:
Degrees of protection by housing (IP code)
EN 61010
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
EN 61326/A1 (IEC 1326) “Emission to class A requirements”
Electromagnetic compatibility (EMC requirements)
The power adapter is approved according to UL/UL-C and IEC 950.
10.1.11 Ordering information
The E+H service organisation can provide detailed ordering information and information
on the order codes on request.
10.1.12 Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are avail-
able for the transmitter and the flow measuring sensors (see Page 47). The E+H service
organisation can provide detailed information on the order codes of your choice.
10.1.13 Documentation
• System Information Prosonic Flow 92 (SI 038D/06/en)
• Technical Information Prosonic Flow 92 (TI 060D/06/en)
To Next Page
Loading...
