11 Description of device functions Prosonic Flow 92
90 Endress+Hauser
11.7.1 Group SYSTEM
System
Þ
Fault Message
Þ
Function
Þ
Signal Check
Þ
Function
Þ
Simulation Current
Þ
Function
Þ
SW-Rev. Amplifier
Þ
Function
System
System Fault Message
Please refer to Section 9 “Trouble-shooting” on Page 49 for further information and remedial measures.
Communication You will find the message “Communication”, as displayed on the screen, on
Page 50.
Amplifier Fault You will find the message “Amplifier Fault”, as displayed on the screen, on
Page 50.
Amplifier Data You will find the message “Amplifier Data”, as displayed on the screen, on
Page 50.
Received Signal You will find the message “Received Signal”, as displayed on the screen, on
Page 50.
Init. Run You will find the message “Init. Run”, as displayed on the screen, on
Page 50.
Signal Low You will find the message “Signal Low”, as displayed on the screen, on
Page 50.
Signal High You will find the message “Signal High”, as displayed on the screen, on
Page 50.
Error Current Output You will find the message “Error Current Output”, as displayed on the screen,
on Page 50.
Backup Battery Fail You will find the message “Backup Battery Fail”, as displayed on the screen,
on Page 50.
To Next Page
Loading...
