Endress+Hauser ria45 - Operability Features; Display Elements

Technical data RIA45
52 Endress+Hauser
13.7 Operability
13.7.1 Display elements
1
2
4
5
6
7
8
9
3
A0010223
 16 Display of the panel meter
1 Channel display: 1: analog input 1; 2: analog input 2; 1M: calculated value 1; 2M: calculated value 2
2 Dot matrix display for TAG, bar graph and unit
3 Limit value indicators in the bar graph
4 "Operation locked" indicator
5 Green LED; measuring device operational
6 Red LED; error/alarm
7 Yellow LED; status of relay 1
8 Yellow LED; status of relay 2
9 Minimum/maximum value indicator
• Display
5-digit, 7-segment backlit LC display
Dot matrix for text/bar graph
• Display range
-99999 to +99999 for measured values
• Signaling
– Setup security locking (lock)
– Measuring range overshoot/undershoot
– 2 x status relay (only if relay option was selected)
13.7.2 Operating elements
3 keys: -, +, E
13.7.3 Remote operation
Configuration
The device can be configured with the PC software or on site using the operating keys.
FieldCare Device Setup is delivered together with the Commubox FXA291 or TXU10-AC
(see ’Accessories’) or can be downloaded free of charge from www.endress.com.
Interface
4-pin socket for the connection with a PC via Commubox FXA291 or TXU10-AC interface
cable (see 'Accessories')