Endress+Hauser ria45 - Setup Menu Parameters

RIA45 Appendix
Endress+Hauser 57
Calc value 1/2
Navigation

Display → Calc value 1/Calc value 1
Description Configures the display for math 1 or math 2. If the parameter is set to ‘Off’,
the channel is not displayed.
Options off
Unit
Bargraph
Bar + unit
Tag + unit
Factory setting off
Contrast
Navigation

Display → Contrast
Description Configures the contrast
Options 1...7
Factory setting 6
Brightness
Navigation

Display → Brightness
Description Configures the brightness
Options 1...7
Factory setting 6
Alternating time
Navigation

Display → Alternating time
Description Configures the time for toggling between the channels displayed.
Options 3 seconds
5 seconds
10 seconds
Factory setting 5 seconds
14.3 Setup menu
Application
Navigation

Setup → Application
Description Configures the application for the process display unit.
Options 1-channel
2-channel
Diff pressure
Factory setting 1- / 2-channel
Additional information 2-channel is the default setting for two-channel devices, 1-channel for
single-channel devices.